ELV Slide Dimmer Light Switch – Single Pole / 3-Way, Wall Plate Included, UL Listed

The ELV Slide Dimmer Light Switch delivers smooth, precise lighting control for modern LED and electronic low-voltage lighting systems. Designed with advanced reverse phase (trailing-edge) dimming technology, it ensures stable performance while reducing flicker and buzzing commonly found in standard dimmers.

Featuring a large slide control for precise brightness adjustment and an integrated rocker switch for quick on/off operation, this dimmer makes it easy to set the perfect lighting level for any environment. Compatible with both 120V residential and 277V commercial electrical systems, it supports a wide range of lighting applications. The included wall plate provides a clean and professional finish after installation.

This dimmer is also designed for easy installation without a neutral wire, making it ideal for older homes or locations where neutral wiring is not available. With support for single-pole and 3-way configurations, it allows lighting to be controlled from one or two locations, such as staircases, hallways, or large rooms.

Key Features

Smooth & Precise Dimming

• Advanced ELV (Electronic Low Voltage) reverse phase dimming technology.

• Provides gradual brightness adjustment with minimal flicker.

• Large slide control allows accurate lighting level selection.

Convenient Control Design

• Integrated rocker switch for easy on/off operation.

• Slide dimmer enables quick brightness adjustments.

• Wall plate included for a clean and professional appearance.

Wide Compatibility

• Supports up to 250W dimmable LED or CFL lighting.

• Supports up to 300W incandescent lighting.

• Works with AC120V and 277V, 60Hz systems for residential and commercial use.

• Compatible with Shine Decor lighting products including Lum Neon, Eco Neon, COB Neon, COB Strip, ProSelect Strip, and ProSelect Neon.

Flexible Installation Options

• Supports single-pole and 3-way wiring configurations.

• Perfect for controlling lighting from one location or two locations.

• No neutral wire required, simplifying installation in older homes.

Quiet & Reliable Operation

• Trailing-edge dimming technology helps reduce buzzing noise.

• Provides smooth and stable lighting transitions.

Technical Details

The dimmer operates on AC120V or 277V at 60Hz and uses a terminal cap wiring type for secure installation. It supports up to 300W for incandescent lighting and 250W for LED or CFL fixtures. The switch is designed to function in operating temperatures between 23°F and 104°F and is UL Listed, ensuring compliance with safety standards.

Each dimmer switch supports a maximum lighting run length of 65.6 feet. Exceeding this recommended length may cause the dimmer to overheat or become damaged.

Applications

• Residential LED lighting control

• Commercial lighting systems

• LED neon and strip lighting installations

• Staircases, hallways, and multi-location lighting control

• Architectural and accent lighting

Conclusion

The ELV Slide Dimmer Light Switch (UL Listed) provides reliable, smooth dimming performance with flexible installation options. With wide compatibility, quiet operation, and an easy-to-use slide control design, it offers an efficient and professional solution for managing LED and low-voltage lighting in both residential and commercial environments.

Illuminate with Brilliance - LED Strip Light Controller

Effortlessly light up your environment with our extensive 150FT LED Strip, offering vibrant and customizable lighting solutions. 

Seamless Control, Unmatched Convenience

Pairing seamlessly with the LED strip, our advanced dimmer controller ensures easy operation and precise lighting adjustments.

Installation Guide

Follow our step-by-step instructions for a hassle-free setup, from correct pin insertion to waterproof sealing, guaranteeing a secure and lasting connection.

1. Prepare the Setup: Ensure the power to the strip light is disconnected or switched off to keep it inactive.

2. Initiate Pairing: Press and hold the "+" button on the remote for 5 to 10 seconds while directing the signal light towards the controller.

3. Continued Pressing and Power Connection: While still holding the "+" button, plug in the light's power cord. Keep the button pressed throughout this step.

4. Indicator for Successful Pairing: Once the light begins flashing, it indicates the successful pairing with the remote. You can now use the remote to control the brightness.

5. Troubleshooting Tips:

   • During step 2, ensure that you press and hold the "+" button for longer than 5 seconds, aiming the signal light towards the controller.
   • If the light doesn't flash after pairing, try the process several times to ensure accurate execution.

Package Include:

• 1x RF remote (cell battery, not included)
• 1x RF controller
• 2x 2-prong pin
• 1x 10-inch heat shrinkable tube

Lumens Depot 110V LED Strip Connector Kit for 6x10mm ProSelect

Package Contents:
This connector kit is designed for 6x10mm unicolor LED strips, offering reliable connections for your LED lighting projects. The package includes:

• Connection Wires:

  • 2 pieces of 3.28 ft (1 meter) connection wires.

• Connector:

  • 1 durable connector for easy strip-to-strip or strip-to-power connections.

• 2-Prong Pins:

  • 10 sturdy 2-prong pins for secure attachment and stability.

• Heat Shrink Tubes:

  • 2 rolls of 20-inch heat shrink tubing for insulation and protection.

Key Features:

• Perfect fit for 6x10mm unicolor LED strips.
• Ensures strong and secure electrical connections.
• Durable materials for long-lasting performance.
• Easy installation with all essential accessories included.

Upgrade your LED lighting setup with this comprehensive and efficient connector kit!

Illuminate with Precision: 3.3FT Aluminum Track Channel for 110V LED Strip Lights (6x10mm & 7.5x11.5mm)

Discover the perfect synergy of form and function with our 3.3FT Aluminum Track Channel, meticulously crafted for 110V LED Strip Lights in both 6x10mm and 7.5x11.5mm dimensions. Elevate your lighting experience with a product designed to marry style and performance seamlessly.

Versatile Compatibility for 110V Brilliance

Our aluminum track channel is engineered to accommodate both 6x10mm and 7.5x11.5mm 110V LED strip lights, offering unparalleled versatility. Whether you're working with standard or wider LED strips, our track channel ensures a snug fit, guaranteeing a polished and professional look for your lighting project.

Robust Construction for Lasting Brilliance

Built to endure, our 3.3FT aluminum track channel boasts a robust design that safeguards your 110V LED strip lights. The durable construction not only enhances the aesthetic appeal of your lighting but also provides long-lasting protection, ensuring your investment stands the test of time.

Seamless Integration for Effortless Elegance

Achieve a flawless lighting installation with our aluminum track channel's seamless integration capability. The 3.3FT length allows for customization, empowering you to tailor the lighting arrangement to your unique preferences. Experience the perfect blend of style and practicality for your 110V LED strip lights.

Key Features at a Glance:

• Versatile Compatibility: 6x10mm & 7.5x11.5mm 110V LED Strip Lights
• Robust Aluminum Construction for Durability
• Seamless Integration for Effortless Installation
• 3.3FT Length for Customized Lighting Arrangements

Effortless Elegance Meets Illuminated Brilliance

Make a statement with your lighting design using our 3.3FT Aluminum Track Channel for 110V LED Strip Lights. Tailored for both 6x10mm and 7.5x11.5mm dimensions, this track channel combines versatile compatibility with enduring construction, ensuring your LED strip lights shine brightly and beautifully. Illuminate your space with precision—order your track channel today.

Universal Dimmer Controller Pack for 120V LED Strip Lights and Neon Rope Lights

Dimmer User Manual

Compatible Models:

        This dimmer controller is specifically designed for All Lumens Depot original 120V LED strip lights and LED neon rope lights. For neon strips that have been cut, a hard-wired connection is required to use this dimmer remote properly.

Important Warnings:

• Not for Low Voltage Lights: Do not use this dimmer with 12V or 24V neon rope lights, as these models already include a remote control.

• CCT Strip Compatibility: The 120V CCT strip light packs are equipped with an IR remote, so an additional dimmer pack is unnecessary.

Features and Notes:

• Brightness Memory Function: The dimmer retains its last brightness setting, eliminating the need to readjust the brightness each time you power it on.

• Simple Operation: Easy to connect and control, providing seamless dimming functionality for 120V lighting setups.

This universal dimmer is ideal for enhancing the versatility and ambiance of your lighting installations while ensuring compatibility and ease of use.